Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Redwood City, CA
Redwood City gate work runs the full spectrum: a 1960s iron gate on a Farm Hill Boulevard hillside one day, a mid-century ranch gate in the flatlands the next. Morning fog and salt air off the Bay eat at hinges and motors faster than homeowners expect, and long, steep driveways put real strain on openers. Calder Gate Repair handles all of it with written pricing before any work starts. If your gate is stuck, grinding, or refusing to open, call (669) 666-6859 and a live person will answer.
Why Redwood City Homes Are Different
Redwood City’s housing stock is a patchwork. Neighborhoods like Redwood Heights and Emerald Hills have long, steep driveways with heavy custom gates, many of them original to homes built in the 1950s and 1960s. Down in the flatlands, you’ll find mid-century ranch homes and newer multi-family developments with lighter gate systems. That means the same crew might fabricate a replacement hinge bracket for a corroded iron gate in the morning and swap a Ghost Controls opener on a newer aluminum gate by afternoon.
The climate does not help. Morning fog rolls in off the Bay, and salt air accelerates corrosion on exposed metal components, especially near the bay side of town. Winter storms push water into hinge pockets and strain motors on hillside properties where gates are fully exposed. In the hills off Farm Hill Boulevard, we regularly work on ornate iron gates from the 1960s that have never been updated. The original manufacturers are long gone, so our techs often fabricate replacement parts on-site to match the existing hardware.
Styles & brands we work with
Our Main Redwood City Services
The two calls we get most from Redwood City homeowners are gates that have stopped moving and openers that run but fail to do their job. Each service has its own detailed Redwood City page below.
Gate Repair in Redwood City
A gate that won’t close is a security problem, not just an inconvenience. In Redwood City, we see hinge failures on heavy hillside gates, sagging frames on older iron gates, and track damage from years of coastal fog and salt air. Every Gate Repair in Redwood City job starts with a written price, and the 365-Day Done Right Promise covers the work in writing. If the repair fails within a year, we come back at no charge.
Electric Gate Repair in Redwood City
Electric gates on Redwood City’s steep driveways work harder than most. Motors, control boards, and limit switches – the small sensors that tell the gate when to stop – take a beating from daily cycles on inclines. When an electric gate fails, it often fails partially: it opens but won’t close, or stops mid-travel. Electric Gate Repair in Redwood City covers diagnostics, board replacement, sensor alignment, and motor work on all major brands.
Gate Opener Repair in Redwood City
Opener failures are the most common call we get in Redwood City, especially on hillside properties where the motor strains against gravity on every cycle. We work on FAAC, BFT, Linear, and Viking openers, plus six other major brands. Gate Opener Repair in Redwood City covers arm replacements, receiver issues, remote programming, and board-level repairs, with parts sourced locally to keep turnaround short.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Redwood City
We’re factory-familiar with nine major gate opener brands, and in Redwood City we see a lot of FAAC and BFT on hillside estates, with Linear and Viking common on newer flatland installations. Common parts are stocked locally, so most opener repairs in Redwood City finish same-day. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Redwood City, CA
| Service | Typical range in Redwood City |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Electric gate repair | $225 – $475 before parts |
| Gate track repair | $200 – $450 |
| Hinge replacement | $150 – $350 per hinge |
| Control board replacement | $250 – $600 |
| Limit switch replacement | $120 – $250 |
| Remote programming or receiver repair | $90 – $200 |
| Motor replacement | $400 – $900 |
| Gate wheel or roller replacement | $100 – $250 per wheel |
| Full gate opener installation | $1,200 – $3,500 |
Hillside properties in Redwood City tend to run toward the upper end of these ranges because the hardware is heavier and the motors work harder. Parts are always quoted separately, and the price you approve in writing before work starts is the price on the invoice, full stop.
Neighborhoods We Serve in Redwood City
We cover all of Redwood City, most calls get a same-day or next-day visit depending on the issue. Representative neighborhoods we serve regularly:
- Redwood Heights
- Emerald Hills
- Farm Hill
- Woodside Plaza
- Roosevelt
Service Area – Cities Near Redwood City
Beyond Redwood City, our crews regularly serve nearby Peninsula communities including Atherton, CA, Menlo Park, CA, Stanford, CA, and Portola Valley, CA. Dispatch and scheduling are coordinated from our San Francisco Bay Area office, and crews serve Redwood City locally.
Serving Redwood City, CA - Our Local Coverage Area
We’re based in the Redwood City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Redwood City
Most Redwood City gate repair calls get a same-day or next-day visit depending on the issue and your schedule. We dispatch background-checked, uniformed technicians with a live, trackable arrival time, not a four-hour window. Call (669) 666-6859 and a live person will book you.
Many Redwood City hillside communities have HOAs with gate appearance rules, especially in Emerald Hills and Redwood Heights. Repairs that keep the same gate and finish usually don’t need approval, but full replacements might. We can help you figure out what your HOA requires before work starts.
No, estimates are free. You’ll get a written price before any work starts, and that price is the price on the invoice. Call (669) 666-6859 to schedule, and a live person answers 24/7.
If your gate is acting up in Redwood City, call Calder Gate Repair at (669) 666-6859. Nico Alvarez and the team will get you a written price, a real arrival time, and the 365-Day Done Right Promise on every repair.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Redwood City Customers Say
"Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.