Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Scotts Valley
Gate repair in Scotts Valley usually means one of three things: a swing gate that’s sagged off its hinges, a slide gate jammed with redwood needles, or an opener that’s stopped responding entirely. We can typically have a technician at your home within a few hours, and most repairs are finished the same day. You’ll get a written price before any work starts, and the number on that quote is the number you pay. Call (669) 666-6859 to book a repair or just to ask a question about what’s going on with your gate.
Why Calder Gate Repair San Jose Is Scotts Valley’s Preferred Gate Repair Company
Calder Gate Repair, led by Nico Alvarez, operates as a gate repair specialist inside the Relay Home Co. family, which was established in 2009. Each location is independently owned and operated under The Relay Visibility Guarantee. Scotts Valley homeowners call us because we’re factory-familiar with the brands on their openers: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters on older installations where the original installer is long gone and nobody remembers the model.
Every job we do in Scotts Valley carries three standing guarantees: a written price before any work starts, a written guarantee on every repair, and a free second visit if that repair fails within 365 days. We call it the 365-Day Done Right Promise, and it’s spelled out on every invoice. Our technicians are background-checked and arrive in uniform, and a live person answers our phone 24 hours a day, seven days a week. No voicemail tag, no automated tree to climb.
Styles & brands we work with
Driveway Gate Repair in Scotts Valley
Driveway Gate Repair in Scotts Valley almost always involves a custom gate, because so many homes here sit on large, sloping lots with long driveways that a standard off-the-shelf gate can’t cover. The work typically means re-hanging a sagging gate, replacing worn hinge bearings, resetting posts that have shifted in wet clay soil, or repairing the opener that’s been fighting the extra weight. A typical driveway gate repair in Scotts Valley runs $250 – $650 before parts, depending on what’s actually failed.
Hinge and Post Work
Worn hinges are the most common cause of a gate that drags on the ground or won’t close fully. On older Scotts Valley gates, the hinge post itself is often the real problem. We dig out rotted wood or jackhammer loose concrete, set a new post in properly compacted gravel and concrete, and re-hang the gate so it swings true.
Realignment and Opener Adjustment
When a gate shifts, the photocell safety beam goes out of alignment and the opener starts misbehaving. We reset the gate’s geometry first, then recalibrate the opener’s limit switches so the gate stops where it should. If the opener is older and damaged beyond adjustment, we’ll quote replacement hardware and explain exactly what the swap involves.
Gate Welding in Scotts Valley
Gate Welding in Scotts Valley comes up often on custom wrought-iron gates that have been through twenty or thirty winters of rust and storm winds. A weld might crack at the hinge, the top rail might separate from a picket, or a rack-and-pinion drive mount might tear loose from the gate frame. Typical welding repairs in Scotts Valley run $180 – $450 per visit, depending on how much metalwork is required.
Rusted Frames and Broken Welds
We grind back rust to clean metal, weld in reinforcement plates where the original tube stock has thinned, and repaint with a weather-matched finish. This is normal maintenance for iron gates in a redwood-shaded climate where moisture sits on metal surfaces for months at a time.
Reinforcing Older Gates
Many gates from the 1970s through 1990s were built with lighter gauge steel than we’d spec today. If the gate is structurally sound but flexing, we add diagonal bracing or plate gussets at stress points. It costs less than a full gate replacement and adds years of life.
Trusted Brands We Service in Scotts Valley
We’re factory-familiar with nine leading gate opener brands, and on this side of the hill we see a lot of FAAC, BFT, Linear, and Viking operators on older custom gates. Calder Gate Repair stocks common replacement parts for these brands locally, so we don’t have to wait on a distributor truck to finish your repair. If your opener is a brand we know well, we’ll tell you upfront whether it makes sense to repair it or switch to something newer with modern safety features.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Scotts Valley Homes
- Redwood needle litter jamming slide tracks. Scotts Valley’s redwood and oak canopy drops a constant stream of needles. They pack into the track of a slide gate, jam the rack-and-pinion drive, and trip the opener’s obstruction circuit. Regular cleaning is the fix, and we’ll show you what to clear out every few weeks.
- Gate posts shifting in wet clay soil. The winter rains saturate the clay-heavy soils on many hillside lots, and posts move. A gate that swung fine in September starts dragging in February. We reset the post in a deeper, properly drained footing.
- Legacy control boards without UL 325 entrapment protection. Homes built in the 1970s through 1990s often run openers that predate modern safety requirements. The gate keeps working until it fails an inspection or reverses on someone. We can retrofit entrapment protection or replace the board.
- Sagging hinge post from a rotted wooden post or cracked concrete. This is the one that brings the whole gate down. The gate tilts, the photocell beam misses, and the opener cycles three times before quitting. We fix the post, not just the symptoms.
Pricing for Gate Repair in Scotts Valley, CA
Here’s what Scotts Valley homeowners can expect to pay. Basic hinge and latch adjustments run $180 – $300. Hinge post repair on a swing gate runs $350 – $700, depending on whether we’re replacing a wooden post or jackhammering cracked concrete. Welding repairs run $180 – $450 per visit. Gate opener board replacement runs $250 – $500 for the part, plus labor. Full opener replacement, including a new operator and arm, typically runs $900 – $1,800 installed. The price is always quoted and agreed before any work starts, and you’ll get it in writing.
We Also Serve Cities Near Scotts Valley
If you’re just over the hill, we also handle Gate Repair work in Los Gatos, Cupertino, Morgan Hill, and Ben Lomond. Our scheduling is coordinated from the brand’s San Francisco Bay Area office, and our crews serve Scotts Valley locally with the same fast response and written pricing.
Serving Scotts Valley, CA - Our Local Coverage Area
We’re based in the Scotts Valley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Scotts Valley
Most swollen wooden gates can be repaired by planing the swollen edge, adjusting the hinges, and sealing the wood. This typically costs $180 – $300. If the wood is rotted or the gate frame has pulled apart, replacement may be the cheaper answer. Call (669) 666-6859 for an honest assessment.
If your opener was installed before the UL 325 standard took effect, it may lack entrapment protection. The telltale sign is the gate reversing on obstruction but continuing under full force otherwise. We can test your system during a service visit and explain what a retrofit or board replacement would cost. Call (669) 666-6859 for a free estimate.
The most common cause is redwood needle litter packed into the track or the rack, which trips the obstruction circuit. It’s a simple cleaning and adjustment in most cases, running around $180 – $250. We’ll also check the limit switches and the drive chain. Call (669) 666-6859 to book a visit.
Yes. We can install a solar-charged battery system for a swing or slide gate, which works well on Scotts Valley’s wooded hillside lots where running conduit is expensive or impractical. The conversion typically runs $1,200 – $2,000 depending on the gate and the opener. Call (669) 666-6859 for a written quote.
The permanent fix is excavating the post, setting a new footing with compacted gravel and concrete, and re-hanging the gate. In Scotts Valley’s clay soils, a shallow footing is never enough. This repair typically runs $350 – $700. Call (669) 666-6859 and we’ll come assess it.
Our crew was called to a hillside home above Granite Creek where a 1990s wrought-iron swing gate had sagged so badly the safety photocell beam no longer aligned. The root cause was a rotted hinge post – the soil had shifted slightly after winter rains – so we dug a new post footing, replaced the post with pressure-treated lumber, and welded reinforcement plates before re-hanging the gate. We then recalibrated the FAAC operator and re-aimed the photocell, and the gate now cycles without binding.
Scotts Valley’s redwood and oak canopy means gate tracks and operators clog with needle litter year-round, but winter storms are the real threat: heavy wind gusts funneling down from the Santa Cruz Mountains push long custom driveway gates off their rack and pinion, stressing legacy openers that were never sized for coastal ridge wind loads. That’s the gate repair problem a fence company can’t solve. It’s what we do.
Call (669) 666-6859 for a free estimate on gate repair in Scotts Valley. A live person answers, day or night, and you’ll get a written price before any work starts.
Written by Nico Alvarez, Owner at Calder Gate Repair San Jose, serving Scotts Valley with written pricing, local dispatch, and the 365-Day Done Right Promise.