Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Atherton
Gate repair in Atherton usually means one of three things: a gate that won’t open, a gate that won’t close, or a gate making a noise it shouldn’t. Most driveway gate repairs in Atherton run between $280 and $650 before parts, and we can typically have a technician to your property the same day you call. Calder Gate Repair San Jose serves every street in Atherton, from the estates off Stockbridge Avenue to the newer builds near Lindenwood, with background-checked technicians who arrive in uniform and quote a written price before touching a single bolt. Call (669) 666-6859 and a live person answers, 24/7, not a voicemail bot.
Why Calder Gate Repair San Jose Is Atherton’s Preferred Gate Repair Company
Atherton is not a place where you gamble on a handyman from a flyer. The gates here are oversized, custom-built, and typically paired with intercoms, cameras, and smart-home integrations that would baffle a general contractor. Our Gate Repair team works on these systems every week. Nico Alvarez, who leads Calder, has built the company around one idea: when a repair is done, the homeowner should have a written price, a written guarantee, and a clear record of what happened.
We quote before we work. That is not a courtesy; it is company policy written into the Relay Standard, the same booking-to-invoice process we run for every job across the Relay Home Co. family. You get a live arrival time, before-and-after photos, and a digital invoice you pay from a link. No cash at the door, no “the bill ended up higher” phone call.
We also back every repair with the 365-Day Done Right Promise. If the repair fails within 365 days, Calder returns at no charge, with a free second visit included. That matters in Atherton, where a gate failure means a long driveway suddenly becomes a security hole for a multi-million-dollar property.
Styles & brands we work with
Driveway Gate Repair in Atherton
Driveway gate repair in Atherton typically runs $300 to $700 for common mechanical issues like sagging panels, misaligned tracks, or failing hinges, before the cost of any specialty parts. Most Atherton driveway gates are swing gates on massive steel or wrought iron frames, and the failure point is almost never the panel itself. It is the hinge post, the weld, or the opener board.
Paired pedestrian and vehicle gates
Many Atherton estates have a pedestrian gate beside the main vehicle gate, both built as a matched set. When one drifts out of alignment or the opener board fails, homeowners usually want both gates synced back to a single keypad or intercom. That is standard work for us. We trace the low-voltage wiring, reset the limits on both operators, and test the full cycle before we leave.
Oversized swing gates on long driveways
Atherton’s long, crushed-stone or paved driveways put unusual strain on the operator because the gate itself is heavier than a standard residential panel. Combined with loop detectors buried under the driveway surface, these systems fail differently than gates in Menlo Park or Redwood City. We inspect the post footing, the weld points, and the detector loop as part of every driveway gate repair here, not just the opener motor.
Gate Welding in Atherton
Gate welding in Atherton generally runs $250 to $900 per repair depending on the location of the crack and the type of metal. Wrought iron and bespoke steel gates are common on the estate properties here, and years of salt air exposure can fatigue the hinge post welds and bottom rails until they crack or split. We weld on site, then grind and finish the repair so it matches the surrounding ironwork as closely as the original patina allows.
Hinge post weld fatigue
The most common welding call we get in Atherton is a sagging gate where the top hinge has begun to pull away from the post. Homeowners notice the gate dragging on the driveway or the latch no longer lining up. We cut the failed weld, reset the hinge in position, and weld it with a full-penetration fillet rather than a surface bead, which is what the original install often used. The difference is years of service life.
Rust-through on bottom rails
Even in Atherton’s fairly mild climate, fine salt carried by bay air settles on steel gates over time. The bottom rail is the first place it eats through because moisture sits there after rain. We cut out the rotted section, weld in a matched steel patch, and treat the repair with a rust-inhibiting primer before painting to match the existing finish. For homeowners who want it, we quote a full refinish separately.
Trusted Brands We Service in Atherton
Our technicians are factory-familiar with FAAC, BFT, Linear, and Viking operators, along with five other leading brands, so the board we carry for your FAAC swing gate is the right version, not an approximate match. We stock common parts for Atherton jobs locally, which means the fix usually happens on the first visit rather than after a week of waiting on a distributor. For estate gates running hydraulic operators or commercial-grade BFT units, we send techs who have worked on that exact hardware, not someone reading the manual on your driveway.
Common Gate Repair Problems We See in Atherton Homes
- Corroded post footings: We see this on coastal-side estates where storm drainage carries salt into the ground around the hinge post. The post itself is fine, but the footing connection rusts and the gate begins to sag within months of a realignment.
- Intermittent opener faults after winter storms: Atherton’s occasional heavy storms knock out power and stress the low-voltage wiring that runs from the house to the gate. We find corroded splice points and fried boards more often after a wet season than any other time of year.
- Loop detector failure under long driveways: Atherton’s driveway loops run long and often sit under stone or pavers, which makes them hard to diagnose without the right equipment. When they fail, the gate either sits open or refuses to open for a car.
- Drifted paired gates: The pedestrian and vehicle gates fall out of sync, typically because one operator board lost its limit settings. Homeowners notice the pedestrian gate closes while the vehicle gate is still moving, or neither responds to the same keypad code.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Atherton, CA
Atherton gate repair pricing covers a wide range because the equipment is wide-ranging. A standard hinge repair on a residential swing gate runs $280 to $450. Gate operator board replacement for a FAAC or BFT unit typically runs $450 to $850 including the part. Full gate welding repairs run $250 to $900 depending on the crack location and finish work. A complete replacement of a hydraulic operator on an estate gate can exceed $2,500, but we will tell you that before we start, in writing. Every job includes a written price agreed at the door, never a surprise invoice. Call (669) 666-6859 and we will give you a firm range over the phone.
We Also Serve Cities Near Atherton
Our Gate Repair in Atherton crews also cover Menlo Park, Redwood City, Stanford, and Portola Valley. If you are on the edge of Atherton near the Menlo Park border or out toward the Santa Cruz Mountains, we can still get to you quickly. Same team, same written pricing, same 365-Day Done Right Promise.
Serving Atherton, CA - Our Local Coverage Area
We’re based in the Atherton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Atherton
Because the footing connection under the post has most likely rusted out, not the panel hinges. Realigning the panel fixes the symptom for a few weeks, then the gate settles again. On a gated estate off Stockbridge Avenue, our crew fixed exactly this: the operator had become intermittent, and we traced it to a corroded post footing connection and a failing loop detector under the asphalt. We reset the footing, replaced the detector, and re-synced the paired pedestrian gate, restoring single-keypad entry without scratching the matching iron finish. Call (669) 666-6859 for an inspection, and we’ll quote the footing repair in writing before any work starts.
Both gate operators need to be wired to the same keypad receiver or programmed to the same wireless code, and you need to confirm both boards speak the same protocol. In Atherton, we do this frequently because so many estates have matched pedestrian and vehicle gate sets. We reprogram both operators, verify the limits, and test the sync cycle. It usually takes under two hours. Call (669) 666-6859 and we’ll check your brand and board version over the phone.
Yes, it does, but it attacks the boards and wiring more than the motors. Salt-laden air from the bay creeps into outdoor-rated housings and corrodes the copper traces on control boards over several seasons. FAAC and BFT hydraulic units tend to age better than cheaper chain-drive units because their boards are often sealed better and the hydraulic components tolerate thermal swings. That said, no board is immune. We replace operator boards on all coastal-side pockets of the Peninsula. Call (669) 666-6859 and we’ll tell you if your fault is board salt damage or a simpler wiring issue.
The first thing to check is the ground-fault circuit and the low-voltage wire that runs from the house to the gate. In Atherton, we see storm-related failures mostly in buried splices that have been wet for years, and in battery backups that were never replaced. We can install a weather-sealed splice box, rerun the low-voltage line, or add a battery backup that actually works. Call (669) 666-6859 for a free estimate; we’ll quote the exact line repair before any work starts.
We can get close, and on aged iron “close” is usually visually indistinguishable from three feet away. The weld itself gets ground and blended, then we prime and paint or patina the area to match. We cannot perfectly reproduce a decade of weather on fresh metal, but our finish work is done to estate standard, not commercial-grade. Most Atherton clients choose to have the whole gate touched up at the same time. Call (669) 666-6859 and we’ll give you an honest assessment and a written price.
Your Atherton Gate Repair Team, Ready When You Need Us
You do not need to live with a gate that creeps, sags, or sits dead after a storm. Calder Gate Repair San Jose covers Atherton with same-day dispatch, written pricing, and the 365-Day Done Right Promise on every job. Nico Alvarez runs the team, and the standard is the same on a small pedestrian latch or a full estate gate rebuild: do it correctly, document it, and stand behind it. Call (669) 666-6859 now for a free estimate. A real person answers, any hour.
Written by Nico Alvarez, Owner at Calder Gate Repair San Jose, serving Atherton and the surrounding Peninsula.