Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in San Jose?
Gate parts and welding in San Jose typically run $150 to $650 for most residential repairs in 2026, with full gate fabrication or major structural welding landing between $800 and $2,500 depending on gate size and metal type. A simple hinge replacement or crack weld usually stays under $300, while custom ironwork or complete gate rebuilds climb higher. Calder Gate Repair gives every San Jose homeowner a written price before any work starts, so the number you approve is the number you pay.
Gate Parts & Welding Cost Breakdown (2026)
Here’s what San Jose homeowners can expect to pay for common gate parts and welding work this year. These ranges reflect the local market, where labor rates, metal costs, and the mix of older steel gates and newer aluminum driveway gates all shape pricing.
| Service or Part | Typical San Jose Price Range |
|---|---|
| Weld repair (crack or broken joint) | $150 – $350 |
| Hinge replacement (pair) | $180 – $420 |
| Gate wheel or roller replacement | $120 – $300 |
| Latch or lock assembly replacement | $140 – $340 |
| Steel gate fabrication (single walk gate) | $600 – $1,400 |
| Aluminum gate fabrication (single walk gate) | $500 – $1,100 |
| Driveway gate fabrication (double swing or slide) | $1,200 – $2,500 |
| Post replacement or reinforcement | $350 – $850 |
| Cosmetic rust repair (grind, treat, repaint) | $200 – $500 |
| Full gate removal and reinstallation | $400 – $900 |
Those numbers cover the most common jobs we handle across San Jose, from Alviso up through Berryessa and down to Almaden Valley. What shifts a price up or down? A few things. Gate material matters a lot. Welding steel costs less than welding aluminum because aluminum requires a TIG setup and more skill to do cleanly. Gate size drives time and consumables, so a 14-foot driveway gate costs more to repair than a 4-foot walk gate. And access matters: gates on slopes, like many in the San Jose foothills, or gates with heavy rust and previous patch welds, take longer to work through.
For a deeper look at the service itself, see our Gate Parts & Welding in San Jose page.
What Affects Gate Parts & Welding Pricing in San Jose
- Gate material. Steel is the most common metal for San Jose gates and welds fastest with MIG. Aluminum gates, popular in newer Willow Glen and Cambrian homes, take TIG welding and run about 20 to 30 percent more for the same repair because the process is slower and the skill floor is higher.
- Gate size and weight. A double driveway gate requires more weld time, more consumables, and sometimes a second set of hands to reposition. Walk gates are almost always cheaper to repair because of weight alone.
- Rust and previous repairs. Older San Jose homes, especially in the Rose Garden and Naglee Park neighborhoods, often have steel gates that have been patched before. Old welds, rust-thinned metal, and warped sections add prep time. You’re paying for the cleanup as much as the weld.
- Hinge and post condition. If hinges are worn or a post has shifted, a weld on the gate itself won’t hold long. Replacing hardware or reinforcing a post adds material cost but prevents a repeat failure. In San Jose’s clay-heavy soil, which expands and contracts with rain, shifting posts are common.
- Finish work. Grinding down a weld and repainting to match your existing gate takes labor. Raw structural welds cost less. Most San Jose homeowners want the repair blended, so we quote finish work separately when needed.
- Service call timing. Emergency calls, like a gate that won’t close on the night you leave for a trip, sometimes carry a dispatch premium depending on time and location. Standard weekday service is always the most affordable option.
How Much Do Common Gate Welding Repairs Cost in San Jose?
Most homeowners call us because something specific broke. Here’s what those specific failures cost.
Broken Hinge Repair
A snapped or seized hinge on a San Jose gate typically costs $180 to $420 to fix, including the new hinge hardware. The weld itself is usually quick, but getting the gate re-aligned so it doesn’t sag takes time. In neighborhoods like Evergreen and Santa Teresa, where large steel driveway gates sit on slight grades, we often find both hinges need replacement at once because one failed hinge overloads the other.
Rust-Through Repair
When rust eats through a steel gate panel, the fix usually runs $200 to $500. That includes cutting out the compromised section, welding in a patch plate, grinding it smooth, and treating the area to slow future rust. San Jose’s dry summers help, but winter rain and morning fog near the bay accelerate rust on untreated steel. If you’re within a few miles of Alviso or the Guadalupe River, we recommend treating your gate with a rust-inhibiting paint every couple of years.
Gate Wheel or Roller Replacement
Slide gates ride on wheels that wear out over time. Replacement runs $120 to $300 per wheel, depending on whether your gate uses lightweight nylon rollers or heavier steel V-groove wheels. A gate that scrapes or shudders while sliding usually needs new wheels, and catching it early prevents rail damage that doubles the repair bill.
Custom Gate Fabrication
If your existing gate is beyond repair, custom fabrication in San Jose starts around $500 for a simple aluminum walk gate and runs $1,200 to $2,500 for a double driveway gate in steel or aluminum. You’re paying for the metal, the cutting and fitting, the welding, and the finish. Calder Gate Repair keeps fabricator relationships local, which means faster turnaround than waiting on a gate shipped from a SoCal shop.
Welding Safety: What You Should Know Before You Call
Welding involves high heat, electrical current, and sometimes open flame. It’s not a casual weekend project. A bad weld on a driveway gate can fail under its own weight, and a falling gate section can cause serious injury. We tell every San Jose homeowner the same thing: if a weld cracks, a hinge breaks, or a post shifts, have a trained professional inspect it before someone gets hurt. Calder technicians are background-checked and trained in structural gate welding, and every repair carries our 365-Day Done Right Promise. If our weld fails within a year, we come back and fix it at no charge, no negotiation.
How to Save on Gate Parts & Welding in San Jose
Gate repair doesn’t have to be expensive, and a few small habits keep costs down.
- Catch small cracks early. A hairline crack in a weld is a $150 job. Wait until it splits and drops the gate, and you’re looking at hinge replacement, gate re-alignment, or worse. Walk your gate line once a season.
- Lubricate hinges and wheels. A $12 can of lithium grease applied twice a year keeps steel-on-steel wear down and extends hinge life. Dry metal grinds, which opens the door to failure.
- Treat rust before it spreads. Surface rust on a steel gate can be wire-brushed and treated cheaply. Rust that sits for two winters turns a small patch into a replacement job.
- Ask for a written quote before committing. Calder Gate Repair never starts a job without a written price. You’ll know the exact dollar figure, the parts involved, and the finish level before a single weld is struck. Call (669) 666-6859 for a free estimate at your San Jose home.
- Bundle small repairs. If you have two or three small issues, a welded hinge, a loose latch plate, a wheel that’s wearing, one service visit costs less than three separate dispatch fees.
How Calder Gate Repair Approaches Welding in San Jose
Calder Gate Repair is the dedicated gate repair specialist inside the Relay Home Co. family, founded in 2009. Led by Nico Alvarez, our San Jose team handles gate parts and welding for homeowners across the city, from Japantown to Silver Creek. Every job comes with three standing guarantees: a written price before any work starts, a written guarantee on every repair, and a free second visit if the repair fails within the 365-Day Done Right Promise window. We don’t offer those as add-ons. They’re included on every single job.
The Relay Standard is how we run the booking-to-invoice experience: a live arrival time you can track, technicians who arrive in uniform and background-checked, before-and-after photos of the work, and a digital invoice you pay from a link. No paper chase, no phone tag, no surprises.
If you’re weighing repair versus replacement or want to understand your gate’s hardware, home is a good starting point for our full service list.
FAQs – Gate Parts & Welding Cost in San Jose
Is it cheaper to repair or replace a gate?
Repair is almost always cheaper. A typical San Jose gate repair runs $150 to $650, while full replacement runs $1,200 to $2,500 for a driveway gate. Replacement makes sense when the frame is rusted through in multiple spots or the gate has warped beyond alignment. If the damage is isolated to hinges, a cracked weld, or a single rust patch, repair keeps more money in your pocket. Call (669) 666-6859 for a free assessment and a written quote either way.
How much does a welded gate hinge replacement cost in San Jose?
Expect to pay $180 to $420 for a full hinge pair replacement in San Jose, including the new hinges and the welding labor. Solid steel barrel hinges cost more than basic strap hinges, and gates on slopes sometimes require re-shimming the post. Calder Gate Repair quotes this work before starting, so the number you get on the estimate is the number on the invoice.
Can you weld a gate back together?
Yes, most cracked or broken steel gate frames can be welded back together successfully. A standard crack weld runs $150 to $350. The key is cleaning the area properly, welding with the right amperage, and checking that the gate still aligns after the repair. Calder welders do this every day across San Jose and stand behind every weld with a written 365-Day Done Right Promise.
How much does custom gate fabrication cost in San Jose?
Custom gate fabrication in San Jose starts at about $500 for a simple aluminum walk gate and runs $1,200 to $2,500 for a double driveway gate, depending on material, size, and finish level. Steel is generally cheaper to fabricate but heavier. Aluminum costs a bit more but resists rust near the bay. For an exact quote on your gate dimensions, call (669) 666-6859; estimates are free.
How long does gate welding take?
Most gate welding repairs in San Jose take one to three hours on site. A single hinge or crack weld is typically done in under an hour of weld time, but alignment and finish work add to the visit. Custom fabrication runs longer, usually three to seven days from order to installation depending on material availability. Calder Gate Repair gives you a live arrival time before we dispatch, so you know exactly when we’ll be there.
Do you work on aluminum gates?
Yes. Calder Gate Repair welds both steel and aluminum gates. Aluminum requires TIG welding, which is slower and calls for more controlled heat input, but it’s the right call for rust resistance near San Jose’s bay-adjacent neighborhoods. Expect aluminum welding to run about 20 to 30 percent more than comparable steel work because of the extra labor involved.
Pricing reflects the San Jose market as of 2026. Calder Gate Repair San Jose offers free estimates, call (669) 666-6859.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving San Jose since 2009.
What Our Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Slide gate wheels replaced. Glides smoothly now."
- Mark T.