Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Menlo Park
Electric gate repair in Menlo Park typically runs $180 – $340 for common opener fixes, with full motor replacements landing between $700 – $1,400 depending on the brand and gate weight. We dispatch trackable technicians to Menlo Park neighborhoods including the Willows, Sharon Heights, and Central Menlo, usually arriving same-day for openers that won’t respond, gates stuck half-open, or keypads that stopped accepting codes. A gate that won’t close leaves your property exposed on Sand Hill Road, Valparaiso Avenue, or any of the quiet cul-de-sacs near downtown, so we treat every Menlo Park call as a same-day priority. Our uniformed technicians arrive with a written price in hand before any work starts, never after.
Call (669) 666-6859 now for a free estimate. A live person answers 24/7, not a voicemail.
Why Calder Gate Repair San Jose Is Menlo Park’s Preferred Electric Gate Repair Company
Menlo Park homeowners call us because we understand what goes wrong with local gate systems. We work on the mid-century wooden swing gates common west of El Camino Real and the heavier estate sliding gates in Sharon Heights and West Menlo. Our Electric Gate Repair team trains specifically on nine brands, including FAAC, BFT, Linear, and Viking, so we arrive with the right diagnostics and parts on the first trip.
Every repair carries the 365-Day Done Right Promise: if the fix fails within 365 days, we return at no charge. That means a free second visit, in writing, on every job. We also give you a written price before anything gets touched, so the number you agree to at your front gate is the number on your digital invoice. No amendments, no surprise labor hours. Our dispatch works from the San Francisco Bay Area office and coordinates crews serving Menlo Park locally, with live arrival times you can track from your phone.
Led by Nico Alvarez, our technicians are background-checked, uniformed, and factory-familiar with the openers you actually have. When a PG&E outage fries a control board on a 1990s-era DoorKing or Linear operator, we’ve seen it before and we stock the replacement boards or retrofit kits that get your gate moving again.
Styles & brands we work with
Commercial Gate Operator in Menlo Park
Commercial Gate Operator service in Menlo Park means working on powered gates at home offices, shared driveway entrances, small HOAs, and estate properties where access control matters as much as curb appeal. These jobs typically involve replacing failed motors, re-aligning rack-and-pinion tracks, upgrading control boards with surge protection, and retrofitting older openers with UL 325 compliant safety sensors. Menlo Park commercial-style gate operator repairs usually cost $500 – $1,800 before parts, depending on operator type and gate length.
Shared Driveway Access Systems
On shared driveways in the Willows and around Santa Cruz Avenue, two or three homes often depend on one automated gate. We repair these systems while keeping vehicle access open during the work. The goal is to minimize the time the gate is out of service, using temporary manual operation or staged repairs that don’t strand residents outside. We quote a written price up front, and every repair includes the 365-day guarantee.
Long Estate Sliding Gate Adjustments
Sliding gates on long Sharon Heights driveways lose rack alignment as concrete footings settle. You’ll notice jerky travel, grinding noise, or the gate reversing mid-travel. We reset the rack, re-level the gate, and replace worn drive gears, often on LiftMaster or FAAC operators that are still otherwise in good shape. Most adjustments run $220 – $450, plus parts if a gear or bracket has worn through.
Automatic Gate Repair in Menlo Park
Automatic Gate Repair in Menlo Park covers any powered gate that opens by remote, keypad, intercom, or sensor. The most common work we perform is replacing tired swing-arm operators on wooden gates, swapping burned-out control boards on sliding gate systems, and repairing or replacing phantom loops and photo-eyes. Typical automatic gate repairs run $185 – $500 before parts, with full automatic gate opener replacement between $900 – $1,600 for a mid-range unit from FAAC, BFT, Linear, or Viking.
Keypads, Remotes, and Intercom Panels
If your remote clicks but the gate ignores it, or your keypad stopped accepting the code after a power flicker, the fix is usually faster than you’d expect. We reprogram existing units when possible, replace failed transmitters, and install weather-sealed keypads rated for Menlo Park’s fog-damp mornings and winter rain. Replacing a failed keypad typically runs $140 – $260 including parts and labor.
Surge-Protected Control Board Replacement
PG&E outages and voltage sags hit West Menlo and the Stanford area especially hard. A 1990s-era GTO or Linear control board with no surge protection can fail the moment power returns. We replace failed boards and, where it makes sense, add an inline surge suppressor so the next outage doesn’t kill the new one. Board replacement plus surge protection generally runs $320 – $550.
Trusted Brands We Service in Menlo Park
We keep common parts in local inventory for the brands Menlo Park gate systems actually run on. That includes FAAC and BFT hydraulic-arm operators found on many Italian-designed estate gates, Linear swing gate openers on mid-century wooden gates, and Viking operators on sliding driveway spans in Sharon Heights. Because our technicians are factory-familiar with these systems, we can usually diagnose and fix the problem on the first visit rather than ordering a mystery part and coming back days later. If you have an older unit that no longer has a model number on the housing, we identify it by board and motor configuration during the initial diagnostic.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Menlo Park Homes
- Hinge post rot on wooden swing gates. Coastal fog and winter rain seep into the original hinge posts on mid-century properties in the Willows and Suburban Park. The post softens, the gate sags, and the opener starts straining. Repair means resetting the post in a steel footing, not just shimming the panel.
- Settled concrete and misaligned sliding gate racks. On long driveways in Sharon Heights, slabs shift just enough to pull the rack out of parallel. The gate jerks, grinds, or trips the safety reverse at random. We re-align the rack and replace the pinion gear if it’s been chewed up.
- Control boards fried by PG&E outages. Power comes back on after an outage, but the gate stays stuck open or closed. Surges destroy older DoorKing, Linear, and Mighty Mule boards that predate modern surge protection. A surge-protected retrofit prevents the repeat failure.
- Safety sensor failures on retrofitted systems. Older gates in Menlo Park often lack modern photoelectric entrapment protection. We retrofit UL 325 compliant photo-eyes and edge sensors on these systems, which matters when you have kids, dogs, or delivery vehicles using the driveway daily.
Pricing for Electric Gate Repair in Menlo Park, CA
Honest numbers, so you know what to expect before you call.
- Diagnostic service call: $75 – $125 (waived if you proceed with the repair)
- Keypad or remote replacement: $140 – $260
- Safety sensor repair or retrofitted photo-eyes: $180 – $320
- Control board replacement with surge protection: $320 – $550
- Swing gate operator replacement: $900 – $1,600 for most residential FAAC, BFT, Linear, or Viking units
- Sliding gate rack alignment or gear replacement: $220 – $450
What moves the price is gate weight, operator type, and how long the post or footing has been failing. A simple keypad swap costs what it costs. A hinge post that needs to be dug out and reset with a steel footing is a different job. Whatever the diagnosis, we write the price down before any work begins, and that’s the number you pay. Estimates are free. Call (669) 666-6859 and we’ll give you a real number, not a vague range that turns into a surprise.
We Also Serve Cities Near Menlo Park
Our Electric Gate Repair in Menlo Park service area covers the neighborhoods here plus the communities immediately around us. We regularly dispatch to Atherton, Stanford, Redwood City, and Portola Valley, so if your property sits near the border, we’re still a fast local call. Same trackable arrival times and written pricing apply across the whole area.
Serving Menlo Park, CA - Our Local Coverage Area
We’re based in the Menlo Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Menlo Park
Menlo Park’s coastal fog sits on the Willows for long summer stretches, then winter rains soak the ground around original hinge posts. The posts on mid-century ranchers were often set directly in concrete without a steel footing or drainage consideration, so decades of moisture eventually soften the base. Reinforcing the post with a steel footing is the reliable fix, and we recommend pairing it with a modern swing gate operator that won’t overstress the repaired post. Call (669) 666-6859 for a free assessment and a written quote.
Yes. We stage sliding gate repairs so the driveway stays usable during the work. The gate can often be placed in manual mode while we replace gears or realign the rack, then re-engaged for testing. For shared driveways where two or more homes rely on the gate, we schedule the work at a time that minimizes disruption and explain the manual operation to every resident. Call (669) 666-6859 and we’ll walk you through what to expect.
Most do. Many openers installed on estate properties in the 1990s and early 2000s predate the current UL 325 standard for safety photocells and contact edge sensors. Without them, the gate can strike a car, a child, or a delivery worker without reversing. We retrofit, and that work typically runs $180 – $320 per sensor or safety edge including installation. Call (669) 666-6859 to schedule a safety inspection.
When PG&E restores power after an outage, a voltage spike can cook the control board on older openers, especially 1990s-era DoorKing and Linear units with no built-in surge suppression. The gate gets stuck open or closed and won’t respond to remotes. Replacing the board with a surge-protected retrofit usually runs $320 – $550 and prevents the same failure after the next outage. Call (669) 666-6859 for a fast diagnosis.
First, fix the post. A sagging gate on a long concrete driveway usually means the hinge post has pulled or settled, not just that the panel is heavy. We reset the post in a steel footing, re-hang the gate level, and then tune or replace the operator so it isn’t fighting a misaligned load. That repair runs $350 – $650 for the footing work, plus operator adjustments or replacement if needed. Call (669) 666-6859 and we’ll measure it for free.
Written by Nico Alvarez, Owner at Calder Gate Repair San Jose, serving Menlo Park with trackable technicians, written pricing, and the 365-Day Done Right Promise.