Ghost Controls Keypad & Intercom Repair Nationwide

Ghost Controls Keypad & Intercom Repair: The San Jose Owner’s Guide

We stock and install Ghost Controls-compatible keypads and intercom modules across San Jose, with most repairs running $185 to $395 installed depending on whether we’re replacing the keypad, the intercom board, or both. Most jobs are completed same-day once we confirm the part matches your opener model, and we carry the common Ghost Controls replacements on the truck.

Call (669) 666-6859

Most San Jose homeowners discover the failure when the keypad goes dead after a rainstorm, or the intercom sounds like static instead of a voice. Sometimes it’s the keypad backlight that starts flickering. Other times the buttons work intermittently but only when pressed at a certain angle. Whatever the first symptom, it almost always points to one of three things: a worn membrane, a corroded connection, or a control board that’s given up.

Key takeaways:

• Ghost Controls keypad and intercom repair in San Jose typically costs $185 to $395 installed
• We stock common Ghost Controls replacement parts on the truck
• Written price before any work starts, plus a 365-Day Done Right Promise on every repair
• Independent service provider, not affiliated with Ghost Controls

Which Ghost Controls Models This Applies To

Ghost Controls builds keypads and intercoms across three main lines: the AXDP series (the most common residential setup), the ABBT battery-belt variant, and the TDS/TSS dual-swing and slide models that often pair with kit-built intercoms. The keypad itself is frequently the AXDP-KP or the AXDP-KEY, and the intercom module is either the wired AXDP-IC or the wireless AXDP-WIC. If you’re not sure which one you have, open the battery cover on the keypad or the intercom housing. Ghost Controls prints the model number on a white sticker inside.

Here’s the compatibility gotcha we see constantly in San Jose: the AXDP keypad is not interchangeable with the older AXD keypad. The connector plug changed shape between generations, and forcing the old one in will bend the pins on the board. If your opener arm says AXDP but the keypad sticker says AXD, that’s your problem right there. We also see aftermarket “universal” keypads wired into Ghost Controls openers, which usually ends with a fried receiver. Stick with OEM or a brand-tested equivalent.

Signs Your Ghost Controls Keypad & Intercom Is Failing

• Keypad won’t light up at all. This is usually dead batteries or a failed membrane. If fresh batteries don’t fix it, the membrane ribbon cable is cracked. We see this on units that sit in direct afternoon sun in neighborhoods like Willow Glen.
• Buttons only work when you press hard or at an angle. That’s the membrane wearing out. The carbon contacts under the rubber degrade over time, especially with daily use.
• Intercom sounds like static or cuts out mid-sentence. Corrosion on the intercom board or a failed capacitor. Units near sprinklers or coastal air in San Jose’s western neighborhoods fail faster.
• Gate opens on its own after a rainstorm. Water got into the keypad housing and is shorting the trigger circuit. This is a safety issue, not just an annoyance.
• One code works but the second code won’t program. That’s the control board’s memory chip starting to fail. It’ll work today and be dead tomorrow.

Replacement Cost & What’s Included

In San Jose, a Ghost Controls keypad replacement runs $185 to $275 installed, and the intercom module runs $225 to $395 installed depending on whether it’s the wired or wireless version. If both need replacing at the same time, most jobs land between $350 and $550 total. The spread comes down to which model you have, whether we’re also repairing water damage to the wiring, and whether the old part comes out clean or fights us on the way out.

Here’s what’s included in every Ghost Controls keypad or intercom repair we do in San Jose: the new part, removal of the failed part, installation, programming your access codes, testing the full open/close cycle three times, and a written price before any work starts. The number on the invoice is the number we agreed to before a single bolt turned. Every repair carries our 365-Day Done Right Promise: if the repair fails within a year, we return at no charge. No fine print, no trip fee.

DIY or Call Us?

Here’s the honest split. You can safely change the keypad batteries, clean the keypad face with a dry cloth, and check that the wire connections at the keypad are tight. That’s about where safe DIY ends. The moment you’re opening the intercom housing or the control board, you’re working with live low-voltage wiring that’s easy to damage and expensive to replace. One wrong probe on the wrong pin and you’ve turned a $250 repair into a $600 board replacement.

Ghost Controls keypads and intercoms are sealed units. If the membrane is cracked or the board is corroded, there’s no “rebuild” that makes sense. The repair is a match-and-replace. We do it cleanly, program it, and test it before we leave. If you’d rather not risk the board, call us at (669) 666-6859 and we’ll take a look.

FAQs