Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Electric Gate Repair in San Jose: What to Know First
Ghost Controls electric gate repair in San Jose typically runs between $215 and $485 for most jobs, with same-week scheduling available for the majority of issues we see. As an independent Ghost Controls service provider, we work on the full residential lineup – from the entry-level AxDP series to the heavier-duty TSS1 and TDS2 openers – and we put every price in writing before turning a single bolt. If your gate won’t open, won’t close, or sounds like it’s grinding itself to death, call (669) 666-6859 and a live person will answer.
This page is for San Jose homeowners and property owners with a Ghost Controls opener that has stopped behaving. You’ll find the exact failure patterns we see across Ghost Controls products, what real repairs cost in this market, and why the fix usually makes more sense than a replacement. We’re not affiliated with Ghost Controls, and we’ll tell you straight when a repair isn’t worth the money.
How Ghost Controls Products Fail – and How We Fix Them
After hundreds of Ghost Controls service calls across San Jose, certain failure patterns repeat. Here are the five we see most often.
- AxDP and Axxess series: capacitor failure after power surges. Ghost Controls openers are sensitive to voltage spikes, which San Jose’s PG&E grid delivers more often than residents realize. The symptom is a gate that hums but won’t move, or moves an inch and quits. We test the capacitor first, replace it with an OEM-spec part when needed, and add a surge protector at the outlet if the board shows signs of repeated stress.
- TSS1 and TDS2: arm fatigue on heavy gates. Ghost Controls arms are built for gates up to their rated weight, but a gate that’s out of balance forces the arm to work harder every cycle. We see this constantly in Almaden Valley, where custom wood gates are common. The fix starts with the gate itself – we rebalance or adjust the hinges – before we condemn the opener. That’s the difference between a $300 repair and a $1,400 replacement.
- Control board failure from moisture intrusion. Ghost Controls boards are well sealed from the factory, but San Jose’s wet winters and morning fog test that seal. When condensation gets in, the board shorts out, and the gate randomly opens or refuses to respond to remotes. We inspect the housing gasket, replace the board with a Ghost Controls-compatible unit, and re-seal the housing properly.
- Limit switch drift: the gate stops six inches short or slams into the post. The limit switch is the small sensor that tells the gate when to stop. On Ghost Controls units, it can drift out of calibration over time, especially if the gate has been bumped by a car or hit by wind. Recalibration is quick and inexpensive, but ignoring it leads to motor damage, which is not.
- Remote and keypad signal loss on the AXDP series. Ghost Controls remotes are generally reliable, but the receiver module on older AxDP boards can degrade, leaving you pressing the button five times before the gate responds. We test the receiver, replace it if needed, and reprogram all remotes and keypads in one visit so you’re not chasing the fix in pieces.
Styles & brands we work with
Our Ghost Controls Electric Gate Repair Process
You call, we show up, the gate gets fixed. Here’s what a typical Ghost Controls repair looks like with us.
- 1
You call (669) 666-6859 and describe what the gate is doing. A live person answers and books the visit. No phone tag, no chatbot. You get a trackable arrival window.
- 2
We diagnose, with you watching if you want. Nico Alvarez and the crew test the power source, the board, the motor, the limits, and the safety sensors. We explain what we find in plain English. If a circuit board is failing, we’ll show you the board. If a limit switch is worn, we’ll point to it.
- 3
We give you the written price before any work starts. Parts and labor, one number. That’s the number on the invoice when we leave. Not a dollar more.
- 4
We make the OEM-versus-aftermarket call together. For safety sensors and wear items, quality aftermarket parts often match OEM performance at a better price. For control boards and motors, we generally recommend Ghost Controls-compatible OEM or OEM-spec parts to keep the opener running the way it was designed to.
- 5
We repair, test, and re-test. A Ghost Controls gate has to open and close smoothly under load, stop at the correct limits, and trigger the safety reversal. We run it through multiple cycles before we clean up.
- 6
You get a digital invoice and our 365-Day Done Right Promise in writing. If the repair fails within a year, we come back at no charge. No fine print, no re-diagnosis fee, no argument.
See the difference
Before
After
Before
After
Before
AfterWhat Ghost Controls Electric Gate Repair Costs in San Jose
Most Ghost Controls electric gate repairs in San Jose fall between $215 and $485, with parts billed at cost. Here’s how the common jobs break down.
| Repair | Typical San Jose Range |
|---|---|
| Limit switch recalibration | $95 – $165 |
| Remote or keypad reprogramming | $85 – $150 |
| Capacitor replacement | $165 – $260 |
| Safety sensor replacement (pair) | $180 – $290 |
| Control board replacement | $340 – $560 |
| Opener arm replacement | $290 – $520 |
| Full opener replacement | $850 – $1,400+ |
The biggest variable is the specific model and how long it’s been failing. A capacitor replacement on a two-year-old AxDP is a quick, affordable job. A board replacement on a ten-year-old TSS1 that’s been exposed to moisture is more involved. Either way, you’ll see the written price before we touch anything. Call (669) 666-6859 for a free estimate on any Ghost Controls repair in San Jose.
Why San Jose Homeowners Call Calder Gate Repair San Jose for Ghost Controls Work
We’re the gate repair specialist inside the Relay Home Co. family, and we’ve been doing this since 2009. That matters because a Ghost Controls opener is not a LiftMaster opener is not a Mighty Mule opener. Each brand has its own failure patterns, wiring logic, and parts quirks. Our techs train on nine major opener brands – including LiftMaster, Mighty Mule, and DoorKing alongside Ghost Controls – so when we show up, we’re not figuring your system out for the first time on your driveway.
Every job with us carries three things in writing: the price before we start, the 365-Day Done Right Promise on the repair, and a free second visit if the fix doesn’t hold. Our technicians are background-checked, uniformed, and arrive with a live arrival time you can track. And when you call, a human picks up. Twenty-four hours a day, seven days a week. That’s The Relay Standard, and it’s how we run every job from Almaden Expressway to Santana Row and across San Jose.
FAQs
Ghost Controls warranties cover manufacturing defects, not service work. As an independent provider, we’re careful to use Ghost Controls-compatible parts and follow manufacturer torque and wiring specs, which protects the integrity of the opener. If your opener is still under warranty and the failure is a manufacturing defect, we’ll give you the documentation to pursue a claim. We just won’t leave you with a broken gate while you wait on a claim.
Yes. We keep the most common Ghost Controls parts in our San Jose service vehicles – capacitors, limit switches, remotes, safety sensors, and control boards for the AxDP, Axxess, TSS1, and TDS2 lines. For less common parts, our supplier relationships get most items to us within two to four business days. We’ll tell you at diagnosis exactly when the part will arrive before we quote the job.
We use a simple rule: if the repair costs more than half the price of a new opener and the unit is over eight years old, replacement usually makes more sense. Most Ghost Controls openers we see in San Jose are under six years old, and the math lands on repair about eight times out of ten. We’ll show you both numbers before you decide. Call (669) 666-6859 for an honest assessment.
Most Ghost Controls repairs are completed in a single visit, and we schedule most calls within one to three business days. Common jobs – capacitor replacement, limit switch recalibration, remote reprogramming – are done in under two hours on site. If a part needs to be ordered, we’ll tell you the timeline before you approve the work.
Yes. We work on nine major gate opener brands across San Jose, including LiftMaster, Mighty Mule, DoorKing, FAAC, BFT, Linear, Viking, and Elite. That matters because many San Jose properties have more than one gate – or a Ghost Controls gate paired with a LiftMaster garage opener – and we can handle all of it in one visit.
Written by Nico Alvarez, Owner & Lead Gate Technician, Calder Gate Repair San Jose at Calder Gate Repair San Jose, serving San Jose and nearby areas.